BDL Bullet Proof Starter Fix

This was a popular post before I scraped the blog and installed the new one so I figured I should post it again.

If you are running a BDL open belt drive primary on your scoot and you have problems with the starter pinion gear engaging the ring gear then this jackshaft fix is what you need.

Bullet Proof Jackshaft Kit
The Bullet Proof Jackshaft Kit.
Picked up the kit from Scooters Performance for just over $100 delivered and it only took about 15 minutes to install. I wrote up a detailed article on the jackshaft installation here.

Got a few hundred miles on it now and the starter has not missed once.

Bullet Proof Kit Installed
Bullet Proof Jackshaft Installed.
Installation instructions for installing the Bullet Proof Jackshaft Kit: http://www.custommotorcyclebuilding.com/articles/bdl-starter-fix.php

Take Care - Ride FREE


Technorati:

   Posted in Motorcycles | 1,820 Views    

Subscribe RSS 2.0 feed. Leave a response, or Trackback from your own site.


Leave a Reply

2 Responses to 'BDL Bullet Proof Starter Fix'

  1. meyerc - September 6th, 2007 at 2:54 pm

    Did you put any of the spacers on before the collar? I did the install without the spacers first to see if I needed any. it didnt work, when I tried to get the long collar off the spline it would not come off so I am stuck without putting spacers and the fix does not work at all.

  2. ron chavez - April 22nd, 2008 at 10:30 pm

    I would like to buy this can you send me info